How to install your Yealink desk phone

Once you have received your Yealink desk phone, we need to make sure you install it properly so you have all the functions of the desk phone. In the box you should have the desk phone, the stand, an ethernet cable, one handset, and handset cord (Power supply is optional). 

You will start by installing the hardware together: handset, handset cable, desk phone, and stand together. Please make sure the handset cable is plugged into the port with the phone icon on the back side of the desk phone. The other end of the handset cable will plug into the bottom of the handset. The stand will plug in above all the ports and slide in. The ethernet cable will plug into the internet port on the phone and the other end will connect to the internet source (network jack, wifi router, etc). If you are using a power cable it will plug into the DC5V port on the phone. 

Once your Yealink desk phone powers on, you should be ready to use it.

If you are still experiencing issues, please contact Cadence Support by Clicking Here.