How to install your Mitel desk phone

If you are installing your desk phone and/or daisy chaining  your computer behind the phone please see the picture below.

The port with the red arrow will connect to your computer (if it has an ethernet port). The yellow arrow will connect to your wifi router or network jack. Please make sure you have a power cable hooked up to your desk phone as well if your router is not set up for POE (power over ethernet).

You can connect your computer via wifi (if applicable) or connect it directly into the router (if it has an available ethernet port). You will have to contact your IT vendor if your computer is having issues.

If you are still experiencing issues, please contact Cadence Support by Clicking Here.